fix retrolink n64 controller sensitivity

The utmost care most be taken when taking the device apart.Īfter the vitals have been removed, it is time to move on to cleaning. if you lightly move it, the character 'walks' in all 3d games. (Picture 4) CAUTION: Failure to take care of the board can cause the device to cease functioning. What you are saying is that there's almost like a gradient of input possible. The Z button's contact sheet is attached with clips, but shouldn't be too hard to remove. Set aside buttons and contact sheets into two different piles for cleaning. (Picture 4) 5.) Remove the Contact Sheets and the Buttons from the Front Shell The control stick housing will be attached to the board at this point, so carefully set both the chip and the attached housing to the side. Connect your N64 controller to your PC USB or PS3 No extra power supply required No driver needed, just plug and play Suitable for both, Desktop and Notebook PCs Compatible with Windows 98, ME, 2000, XP, Vista and Windows 7,'windows 8 32 bit and 64 bit ,Windows 10,Windows 10,Mac OS Two players can play simultaneousl Nintendo 64 controllers are.

(Picture 3) 4.) Remove the wire from the holders, and lift the Board carefully out N64 controller adapter for PC USB driver. The black screw holds the housing together, and will be dealt with in a later step. Make sure to only unscrew the three silver screws. The Nintendo 64 controller (NUS-005) is the standard game controller included with the Nintendo 64. Set the shell aside for cleaning (if needed, usually only the outside will need the cleaning.) 3.) Unscrew the three silver screws that hold the Control Stick Housing in place To remove, push the Z button in, and slide up. The Z button is clipped into the back shell. Lift the shell carefully to avoid breaking any of the plastic screw holders. (Pictures 1 and 2) 2.) Remove the Back Shell and the Z button Make sure that all nine screws have been removed to safely remove the back shell. Seven of these nine screws are located on the back shell in plain sight, while two are next to the accessory input. 1.) Unscrew the nine screws that hold the Back Shell in place.

The first step is to open the controller, and remove the components within: WARNING: Make sure device is not plugged in, as there is a chance of injury due to electric shock.

Fix retrolink n64 controller sensitivity